Medailles Folies (1/2" Kern)
Medal Print foil on the 1/2" core, 110 mm × 50 m, for the older Plus printer and for an Express fitted with the core adaptor. Four foils – black plus metallic red, green and blue – covering the colours most medal and rosette centres are printed in.
Jet Printer Handbook – setup, software and troubleshooting What you can print on ribbon
- 1/2"Core size
- 50 mRoll length
- 110 mmSingle width
- 4Colours
What Medal Print is
A label system rather than a ribbon: Medal Print labels in clear, metallised and gloss finishes, printed on the same machine you print ribbon on. Used for medal centres, rosette centres, trophy plinth plates, favour tags and glassware labels, with the label shapes built into the Ribbon Print software as templates.
The 110 mm width covers every label sheet the printer takes. If you print medal and rosette centres in volume, the narrower rolls in the 1" core Medal Print range work out cheaper per label.
Which printers take these
The Plus printer takes 1/2" core as standard, and an Express will run them with the 1/2" Express core adaptor. The Jet 300 and Jet 600 take 1" core only.
Not sure which core your printer takes? The foil core is the cardboard tube the foil is wound on, and it is printed on the end of every roll. Send us a photo and we will check it with you before you order.
Quantity discount
Applied automatically in the basket – no code needed. It counts foils across the whole order, so a mixed basket of widths and colours still reaches the next tier.
| Foils in the order | Discount |
|---|---|
| 2 or more | 5% |
| 5 or more | 10% |
| 10 or more | 15% |
| 20 or more | 25% |
What you can print
- Medal ribbons and centresClubs, schools and shows.
- Rosette tailsThe tails to go with the centres.
- Everything you can printAll the guides.
Not sure which foil width or core size you need for your printer? Get in touch or call +44 (0) 203 397 4117.